The truck entered the shop a little over 2 weeks ago as a 1988 Peterbilt 379 Extended Hood with a 3406B model Caterpillar engine that was no...
The 3rd segment of meeting CARB Compliance through 2023 with a 1988 Peterbilt 379 chassis. This part is based solely on the DPF integration into...
Time for the second installment of making an 88' Pete 379 CARB compliant through 2023 to run in the state of California. In Part 1 we detailed...
Follow along as Kustom Products upgrades an 88' Pete 379 extended hood to meet California CARB compliance. The Pete came in with a 3406B CAT...
This conversion is as easy as it gets. You will want to reuse the front motor mount off of the b-model. You need to look at the flywheel housing...
It's a good possibility that it could be from the thrust bearings for the crankshaft. I've also seen it come from the bearings in the oil pump.
[ATTACH] 1981 peterbilt 359 with 389 20k lb front suspension and axle with dual steering boxes. I wish i had a better picture of this one, didn't...
I'm guessing that you want a lowered or stock height stance going down the road and still want to drop it when you park? I havn't installed a air...
jjscherler, are you going to install the huck's yourself? I don't know what your experience is but i would recommend you contact a reputable body...
They are eaton ngr switches. The whole switch has to be changed. It is much cheaper to buy the switch through eaton or a eaton dealer as opposed...
You'll have no issues. The hardest part will be to have someone setup your parameters in the adem II that will match and work the same way the...
Go with the horton roller bushings, you'll never go back.
KHP offers a complete kit to swap engines. There's more to this than just a TPS. 1,250 gets you this kit. 3,250 is a complete package to put...
http://www.kustomharnessproducts.com/ For what you are thinking of doing a rewire is a 1 day turn around.
This maybe a dumb question but, are the spacers under the bolts? The spacers allow for longer bolts that will stretch further than shorter bolts...
I'm not a fan of sealants around windshield seals but, sometimes the the body gets bad enough that new seals won't work without bodywork. In these...
There is nothing wrong with installing a ADEM2000 generation engine in an older truck. In my experience, most of the time someone who is...
Check out dirk's wiper systems. I have used these systems in the past for both peterbilt and kenworth and they fit and work great. To my knowledge...
The most common overlooked problems are related to grounds. You didn't say which hood you have, but i would check your ground.
priceless 1010, do you happen to know if the engine ecm drives the speedo? If it does, then it's easy. Just go into a dealer and have them...
