There is a slight decrease in available BTUs from ULSD, but you really shouldn't notice it. Have you checked the airfilter? Did you blow back...
Not true, the coil on the W5000 is larger in diameter...the W5000 load is physically larger than a W1000. And I stand by my statement, it was a...
Actually, you can see an improvement in transmit and receive as you go up in these antennas. For whatever reason (better coax, more efficient...
The receive can be "tuned" inside a radio, just like the transmit. The antenna and coax plays a big part, but usually if you can transmit ok,...
I have a Gulf Coast Filter on my Dodge Pickup (the Model 0-1)...with UOAs, it is proving to be a very good addition...my only caution is the need...
There are a couple other out there...radioactive radio and cb city...both have websites. If you're near Reading, PA anytime, there's a cb shop in...
Each mic may sound different on the same radio... I have a RK-56 on my Cobra29 and Connex 3300HP...they sound great. I had the same RK-56 on my...
I have the trunk mount, but only one "whip"...I need a second whip/load to make a second antenna setup...I'm using the original load with a magnet...
OK, thanks... I wondered about the aluminum wire deal as I did know copper is better... So simply grounding the base will suffice?? That makes...
OK, here's the deal: I have a small Midland radio and a trunk-mount Wilson 1000...that's the easy part. The difficult problem is the fact the...
Here are some pictures of a paper towel filter...these are supposedly one of the best forms of filtration... [IMG] That is the GCF compared to a...
OK, this is a "blank post" so I can link some pictures of my GCF... steved
I'd find the tallest fiberglass antenna that you can mount on the bumper and still fit in the garage...preferably a Francis Firestick. Short...
IMO, I'd stop at a reputable cb shop and see what they have used...nothing wrong with a used Cobra29 or such... My first "good" radio was a...
Most guys I talked with don't like them...slippery in snow, blowouts are definately scary... I can see from a companies standpoint they are...
I talked with Wix's engineers and was told they didn't make a standalone bypass filter/filter head?? steved
You are correct, the paper towels are inserted into a canister, the oil flows through the length of the roll (the center tube is plugged)...it's...
I have a Cobra 29 that is dated 1992...I bought it used, it's been in three trucks (3/4 ton pickups) I owned...I never had trouble with it, they...
I just bought a Gulf Coast 0-1 Bypass Filter...they use either the Gulf Coast filter or a roll of paper towels. I plan on using the latter,...
I said nothing about split speed limits. That is one of my biggest peeves going...the trucks are a moving target. I don't think they should...
