I can't remember the tire number but when I ran i triaxle stepdeck with 17.5,,,sailing was the deal and they held up well and had good retreadability.
Picked up a surveyor pole from Home Depot,,think I spent about $60 for it added a piece of pvc to the top to create a arm for checking any thing...
If you have a Apu on that side can also cause that replaced driver side springs on my prostar,,,,still had a lean,,,500lb Apu on the same side,
I'm adding this to mines next time I need shocks
[IMG] Categories International ProStar Replacement Sleeper Suspension Kit (Pro*Ride) [IMG] [IMG] Uniquely designed and manufactured...
That's what I was looking at,FYI for anyone interested a70" belt will bypass the AC compressor to get you up and running if your on the side of...
You must work for ADS drainage systems,they run those kind of stepdeck,to haul pipe and use the short top deck for pipe unions and misc.the...
Has anyone had the pleasure of changing the AC compressor on a 2012 maxxforce13,how involved is it and what were your cost?
Heavy D wanted to say thanks for your help,got truck updated.Its running great so far.
That's good info,still waiting to get into shop
What's the procedure and materials used to flush the egr cooler?
Thanks HeavyD in the process of purchasing this truck and trying to get ahead of any problems, can Intl give me a sensor location for this engine....
Can you check this vin and see if it needs any updates or campaigns,,,CN563693.thanks a bunch
I also have the intl9400i with the c13,the exact same set-up as you I went straight pipes and bought the u-pipes, that replaces the muffler...
Where did you buy your parts?
I have had both had a fleet air on my n14 and i got the k&n on my c13 they both work good,it really boils down to a matter of choice,,,,,before i...
Might be your wiring harness,,,,i have a c13 in a 9400 and mines is doing something similar,i replaced the actuators on #6.the code your getting...
Thanks for the tips,,, took it to cat,tech said i got an open circuit on the harness going to the ecm but i will still try some of you guys tips,,,,
My c13 keeps showing theses codes,i have replaced the solenoids and updated my wiring harness plugs any suggestions on clearing up these codes?
i bought a set from diesel freaks in michigan,i have a 05 kcb,c-13 it did wake it up,boost wire gives you a lot of black smoke,unless you roll...
