H rings dislodge causing cam followers to rotate wiping out cam.make sure you ask if cam and followers were replaced.i believe they had issues...
are they any good and or what years were good for detroits.
i've seen 3/8 on both service and emergency from tp to glad hands.but also have seen 1/2 on service and 3/8 on emergency and vise versa.Which way...
Ok I'll back track and check piping and centrimax.thanks for info ill let everyone know what I find.
Working on a maxxforce 7.6l and found charge air cooler plugged internally with what it looks like undercoating.oily and sticky.the cooler is...
I know but it won't stop flashing
Working on a 2000 WS flashing a code 55 all the time.tried clearing code as soon as you start the truck it continues to flash.changed both cruise...
i wouldn't trust any pirate sites,if there was any problems with software who do you go back to after they have your money.Maybe Mr. Haney can help.
Dealer told me that cat no longer sells their software to independant garages only to dealers.
i have the vp 44 power relay powered with a toggle and the ground paralleled.So the pump should be powered up all the time could the the fuel pump...
is that on the vp 44 pump or the ECM
2002 mt 45 scanned with insite.trouble codes 115,391,364,234,373,369,434,362.While truck was running truck shut off and 391 and 364 became active.
vp pump needs to be replaced i guess
wouldn't it throw a code,
cleaned the batteries,and all the grounds on frame.
Working on a 02 freightliner mt 45.Has a ISB that is randomly shutting down.At idle it surges sometimes.Changed lift pump,put inline filter before...
Thanks ordered the rebuild kit going to refresh the motor.
Have a DT 466E w/137k on it.Getting coolant in oil.#3 liner leaking.Pulled head #3 piston scoared bad.Pulled liner o rings broken,no broken rings...
rebuild AFR. Had a truck come in with same symptoms.Removed and disassembled valve diaphram looked ok no holesReplaced diaphram and internal o...
thanks.Removed injectors #5 missing bottom o ring.Some one put in remans recently and must of forgot seal.Have the tools done these before valve...
