yes rolled it back 60* had the nuts on the advance finger tight
i got a 3406c model rebuilt the timing advance and now i got a rough idel and lot of white smoke im thinking the timing is to low i pined the fly...
got it goin thanks for the help the oil pump gear wasnt meshin good with the crank gear worried me for a min
just done inframe on my 3406c model got it all back together wint to turn the engine to adjust the valves and it wont turn it turned fine till i...
can you prime the oil pump some way on a 3406 c model manual motor
i was wondering what to torque the rods on my 3406c model engine its the manuel pump motor it has the cap screw style bolts not the stud type with...
id like to check mine befor i go back together with it hate to burn a new piston did your truck run better win you wint two 17.5* from the factory...
does the c models got timming marks on the fly wheel
seems like 17.5 would be a little high i got the head off mine so its purty easy to see the cracks
there cracked threw the top number 6 is the worst one its cracked all the way across and the others are crackt from the outside edge to the middle
well got my injectors tested today by taylor diesel they wasnt holding pressure like they should and wasnt atomizing hardly any so thats that now...
nothing yet got everthing pulled off the head goin to try to get my injectors tested tommorow if i can find somewhere to get it done i hope its...
its rated at 425
oil and coolant stay the same no oil in the water no water in the oil
i was running up the road in my truck today and all of a sudden it started missin and white smokin out of the stacks and alot of blow by out the...
what do you torque the bolts to that holds the chunk in
i sure hope so i bought the reman chunks threw weller truck parts hope they do a good job rebuilding them should have it all back together...
pulled my carrier apart today the 4 spider gears wear wore bad and the axle gears to a thrush washer was crackt on one spider gear the gears were...
im runnin 11r 22.5 it just seems like my truck is to fast geared ive drove alot of trucks with my same set up none off them will go as fast as...
ill pull it apart in the mornin and check it out im thinking about goin back with 3.70 or 3.90 i run we haul what do yall think would be better or...