Unfortunately there is no factory rod that will let you use the 14L pistons in the 12.7. The 12.7 and 14L share the same length rod. The pin...
Happy New Year every one!!!
Merry Christmas and a happy new year
Sounds like a wiring harness or sensor issue. Air intake temp sensor's can cause some similar issues. There was a factory fix with a resistor. On...
Drove a truck a month ago and was surprised at how well they worked. I will be installing them in the truck I'm building now.
Happy Easter!!!!!!
Not sure if there legal but I've seen them on EBAY.
I would agree with what beenjammin says.
Yes they are one piece monotherms
If it is a stainless line check for cracks in the line at the bends.
Not all engines are programed to idle up the same in cold conditions. I have seen the idle set at 900rpm at 33c most are at 760rpm at 33c some Ive...
Is the ecm program original or has it been tuned? Is it a ddec 4?
How much difference is there when its up to temp? How cold is it in the video?
That would be good advise from cowpie1. Cowpie1 what makes you fond of the davco I get mixed reviews?
Hope this helps I posted this a long time ago....
The stepped is ddec V inj. The tapered are ddec IV. The r5237466 is for ddecIV.
A little more info then you need but towards the end is a section on protrusion. http://www.ddcsn.com/cps/rde/xbcr/ddcsn/23-60-03a.pdf
Looks like a cool ride! I'm sure its better than a pickup. What do you estimate your total gross weight?
Happy New Year !!!
Tell us more about the Freightliner. Trans rear engine spec?