I think your right on the money. Thanks for your help. I was thinking no way it's the speed sensor because cruise works and the speedo works....
Hey folks have another head scratcher for ya'll. I'm working with a 96 Freightliner FLD Cummins N-14 Celect. When parked the High Idle (pto idle)...
I guess I will have to see total axle length to get the bridge formula. Thanks a bunch.
I pull hopper and I always come out heavy on my drives. I have a spread axle trailer and I can never get the rear axles to take much weight...
With that Bendix Tu-Flo 550 will I still have to change the coolant and fuel plumbing from stock? I started pulling trailers with quick release...
Does anyone know if there is a high volume air compressor available for the N14? I'm looking for something with more output than the stock one.
Old post I almost forgot about. Since there is new response to it I will update things a but to help others out if they have the problems. Cory...
555 mine does the same thing. I have 120,000 on a inframe. It's been doing it since day one on the rebuild. I have taken it back multiple times...
mmalutki, I have over 100k on the overhaul now. I still have the same problems. The only change is that the chatter noise is louder. I had the...
I took it in to the dyno. We really couldn't get it to do it there. I could kinda hear the chatter noise and it sounded like it was in the front...
What brand of filter? I have bad luck with fleetguard doing this. Its almost like the o-ring they give you is junk.
I am taking it in to the "dyno" on Friday. Hopefully we can get it do it there. I'll keep you folks posted on the end results. And heavyhaulerss...
Did you change the engine position sensor located by the air compressor? Do you have a switch you can flip that the check engine light will flash...
I replaced the followers about 3 years ago. I have kinda been leaning towards cam or rollers. Nothing seemed out of whack when they did the...
Fuel mileage is the same. When they replace injectors on the old Celect is there something on the injector its self that controls timing? Someone...
I had a bad drive tire and my old freightliner would vibrate at speed above 55mph. Replaced that one tire and it was fine. Do them centramatics...
It spins free and starts right up no smoke, no missing. Sounds like the classic n-14 other than the chatter at idle and knock going down the...
Thanks VisionLogistics, however my engine does not have EGR and the turbo is also pre-waste gate. The knocking sound sounds almost internal in...
I have a 95 N-14 460E Celect (not plus) I had it overhauled back in February. I have approx. 40k miles on the rebuild. Replaced the heads kept the...
Rockwell RD-20-145 on the drive axles and Rockwell FF-961 nx123 on the steer.