On Kenworth T800 2006. You should change the flasher to led style as said in other post. All will work fine.
Like smellfunny said. You will need a led flasher. The one side might be putting more resistance on the flasher and thats why it trips the old...
Try to do hard reset. Disconnect Batteries and reconnect.
Have this system in a 2015 KW T800. Works good. Was just wondering if I could program other guages into the system and take away one. I need to...
Is Def here to stay? Some Rumors out there that new Trucks in the Future will not require it. Ie Cummins. We have 2013 Cummins Isx 550's, run...
Hi guys I was wondering about two trucks we have. One is a 2006 KW T800 ISX 500/1650. Other is a 2006 KW T800 ISX 530/1850. The 500 is quite noisy...
Has this Happen to 06 ISX. Would not start just kept cranking with rpm and speedo going crazy. Found it to be bad ground connection on inside...
Ok, gonna have cooler tested
Hi guys, i have a 2006 KW with Cummins ISX. Recently I seem to have a coolant loss issue. The Coolant was low and could not find any leaks on...
EverLuc. That tee way will prob not work. Because the UBL kit Bags need close to Supply pressure to lift axle. If you are going the Manual way...
There are many Valve kits you can use. Haldex Ilas system is a good one. Fully auto. Sealco 138000 is a manual valve that You have to push to lift...
Would sampling catch this rod bearing issue! We had one let go on a 565isx and damage crank. Had to swap out motor! Motor only had 10,000hrs on...
Hi guys I have a question about a 18918B. When I move the splitter from front to back it makes a growl sound at the shifter knob. Everything else...
Thanks for info HeavyD. Thats what Cummins said as well. Test again at half way point of interval and compare results. The motor was worked hard...
Hi guys I just had a oil sample report come back with a warning with high iron levels of 117ppm. It is a 2007 ISX and out of warranty. the...
We ordered a 4 Axle Transfer Trailer with Disc Brakes. It is more expensive about $1200 per Axle right now and a special order. Take delivery in 2...
Thanks for info! The Egr on 07 Dpf isx is on Driver side (cold side). So we did some research and found it is best to block at exhaust manifold...
Yeah Thanks guys. I am leaning that way as well. Egr might be sticking open with the pressure from the exhaust manifold. It is ecm bypassed, I had...
We looked into this a few years ago when we were having problems with our cummins isx 550. Had our rep look into original factory dyno report and...
Hi guys, i have 2007 isx 550 and have had a dpf delete done. Problem is I get black smoke when starting out and when boost is low(around 15psi)...