No real feedback to share....by that I mean engines we fitted them too were not running standard chargers, injectors etc. Assuming yours is still...
Much better than OEM. The last one we fitted was to a 904. Back then the manifolds sold here were only available in mid mount configuration....
Sounds like you're onto a great deal there ENR...I suggest you ask a few questions regarding these injectors though. Not quite sure if Neil...
You will have to remove the 3/4" bolts mounting rocker assembly to cylinder head, as shown in your picture. These bolts travel through rocker...
Yes Cat does make an 18 liter 1000 hp acert. Yet not an acert as we know it when comparing with on highway engines. They do not run compound turbo...
The cat harness part number is 133-8109. Or if you would like to do as Jas said and go the OEM 70 pin plug route, Cat OEM plug number 160-7689.
You will need some specific Caterpillar tooling to carry out this job, which can be rather expensive for a once off use. Most likely you will...
When the engine fires into life after it 'stalls' does it blow white smoke initially from exhaust? And can you smell unburnt diesel? This is a...
DDS or Mr.H, could you please help with the flow rate specification of this particular injector? Thanks in advance.:biggrin_25525:
Thank you for the replies. I wasn't even close with the comparison of the two. I agree with the use of new over reman. Unfortunately...
Has anyone tried or have additional information on this injector? After searching forums for an injector when matched with the 130 9710 camshaft,...
