I replaced my PC Miler 740 with the Cobra 7750 Platinum. Got tired of it freezing up about every 4 days. Had it ever since the 740 came out. Also,...
I picked one up in Kingman, Az. at the Petro. Used it on a run down to Casa Grande, Az.. Maximum volume was so low that I could barely hear it. I...
Pablo, I am currently running a Pittsburg Power zero back pressure muffler. Would this have a negative action on the turbo? I read in the Cummins...
Pablo, I located a 30 amp fuse and a 10 amp fuse in the battery box. I was not sure which fuse you were talking about, so I changed both of them....
Pablo, thanks for the info. I will check the fuse in the battery box now. I found my steering wheel crooked when I got my truck out of the body...
P.S. would a bad low pressure switch in the bunk a/c system have anything to do with this. My a/c system is fully charged.
I was finally able to check the current to the blower motor with a multimeter. I got a reading of 5.4 volts.I am getting power to the blower motor...
These are the fault codes with key on engine off. Engine ECU= MID 128, SID 251 and FMI 2. Brake ECU= MID 136. SID 89 and FMI 2. Vehicle ECU= MID...
I am having two (2) issues with my truck. The truck is a 2007 VN 670. It has a Cummins ISX 400 engine. The issues are, 1, With a moderate to...
What are you talking about fmi numbers?
Forgot to mention the truck. 2007 Volvo 670 with a ISX 400. Engine was upgraded to 450 by Cummins.
I checked for fault codes last night and found these. Engine ECU = MID 128, Brake ECU = MID 136, Vehicle ECU = MID 144 and PSID 48. Also Light...
Does anybody know where I can get a good deal on a EGR Valve for a Cummins ISX? Cummins quoted me $1020.00 for one and Volvo wants a lot more than...
I found a product by Mothers that is a polish for headlights. I used it on mine and it works very well. Big improvement.
The resistor is mounted on top of the blower motor. The wiring from the blower go to the control panel on the other side of the sleeper. There is...
I have a problem with the bunk A/C. I am getting power to the bunk blower motor but it will not work. I replaced the blower but, still nothing....
:biggrin_2554:According to their table, starting in January will effect 1996-1999 to have a PM Filter from 2012 to 2020. Then they will have to...
According to the California Emission Regulation that take effect in 2012, a 2000 through 2001 model trucks will require a PM filter to go from...
