If you have EPA04 detroit or newer, i believe that is DDEC V and newer (could be 4's also) then the head will NOT have to come off.. the cups on...
i'm talking about on a volvo truck with d12c engine, how do i get the development software?
well i have cummins insite, and i have volvo vcads... but not development mode. how do you get it? i need to change several parameters in truck...
do you have to have development mode of PTT/vcads to change ecm parameters such as road speed?
The last time i was under the valve cover putting an injector in... i noticed the marks around the cam gear... if i remember correctly, they are...
Thanks WildRose and pablo. Just to be sure, when you say adjust bridges first... do you adjust them to .02mm as well? Thanks, jake
In my manual it says 118-137 ft. lbs.
Use a scissor jack to jack the cab up. (from spare tire bay of car) and then pull the back out. disconnect air line. changing cab air bags are...
Thanks for all the replies and helpful advice. I don't plan on going OTR anytime soon... i just need to be able to test drive trucks and also...
I am a truck mechanic and I can not stand it any longer not being able to "road test" the trucks i work on. I want to get my CDL's but i'm not...
i found a guy that works for genparts.eu (it think) and he sent me this picture of the kit he sells... for around $130? i think... plus another...
i need the gasket that is in-between plate 43
yeah, this is an 02 truck with a D12C in it... pre-egr!
also, what is the tech tool volvo uses for laptop hookup? i've heard it's volvo premium tech tool/vcads? is this correct? i'm going to buy the...
Hey Pablo, i got those numbers... i'm going to post all of them off the plate on the back of the compressor. Knorr-Bremse 20429339 01223...
from my experience with mercedes engines, you will definately need some inframe kits. they had alot of problems with the heads and gaskets.. also...
what engine?
delphi, i think i read somewhere you set them to 2 flats? or maybe it's 1...
did you happen to get the lash settings? also, what kind of tool do they make (if any) to lift the rocker arm and shaft? i know detroit makes a...
i have a driver that complains of this same vibration.. let me know if you find out what it is. i think his ride height is a little high myself,...