Yes they are SMT and I would have a professional do the work its just a matter of removing a resistor but unless you have a fine tip solder gun...
Egr valve clogged would cause high egt too? I have been fighting this same issue with a CM870 since back in october when it starting getting cold...
Where are your settings mike/woreout ? I don't like the repeating echo and it just seems like there is always more going out than what you here in...
Don't know what the pressure was reading I do know we have tried a different ecm from a fleet truck with no change.
The ambient air temp sensor has been replaced is this any relation? I'm thinking I have a short or something in the wiring.About the only thing...
Charge air is new also.
In frame was done less than 50k.Truck changes tone and I lose about 10lbs boost and the pyro spikes upwards of 900-1000 deg.Sometimes it will stay...
I'll second the General Lee (Connex 3300 same radio) great clean loud audio.Right now I'm running a Galaxy 44HP(same chassis as GL) I do also have...
I often swap out radios just out of boredom but right now I have a Galaxy 44hp and a Wilson 2000 paired with mini-8 coax.
Injector wiring harness?
I always run mine on high close talking or not.My is set for 2w on low 6w on high swings around 55 ish.
Cant say Im up on all the technical stuff just that In my instance one antenna worked as well as two.Could be that the 3ft peterbilt antenna's...
I used RG8X or mini 8 as it is called.Not to big but bigger than the factory coax.
Recently I asked for advice on running a single piece of coax for a 07 pete being tired of replacing p/s antenna's on the factory setup.Well...
Francis antenna's need 18ft of coax.
How about the wilson's?Will they take tree branches well?I'm assuming they would tx/rx better than the antenna's I'm using?
Current setup is 2007 daycab pete with 3ft peterbilt antennas and factory coax.My passenger side antenna is taking a beating(already replaced...
It is a 08 model.
Want to do away with factory antenna setup and run a single on d/s.I am having a hard time getting good swr's with my wilson2000's.Anyone using a...
