Well...I feel like a horses #####. After digging and digging, I pulled the pigtail harness from switch to truck. Cut the two plugs off and hard...
I checked out the trl plug inside the truck. Looks to be OK. What it appears to me is, off the brake light switch, there's two wires. (3 but one...
Tried the trl chord, same problem.
So when I turn on my right turn, the tail lights both flash. Left turn works fine. And its only the tail lights flashing. It's not a dim flash...
Well it was something stupid/minor. When I pulled the air gov. Off it has a fittingvwithvan o ring that pushes in to the dryer housing and appears...
After reading almost every posting I could find I thought I understood this system. And yet again I'm wrong. The air dryer is connected right to...
Finally got it all done. Arms about worn out. After repeated hits to the axle and punch blows counterclockwise, they came turned off. What a p.I.t.a.
Well they probably didn't come with threads, but they didn't just slide off or bk on, had to vice grip and bk em all the way off the stud. Drivers...
I've hit it pretty dam hard. But the tappets literally have threads. At least the pass side did. I'll try it again tomorrow.
Trying to remove the axle shafts on an 07 9200i. Pass. Side was a pita. The "tappets" between the but and shaft didn't want come free. Finally...
I pulled the check valve off the back of engine. (After pulling tire and inner fender). Fuel drained out of head and o rings seemed good same with...
I looked in tanks the tanks. Theres black on the sides and tubes. But not on the bottom. Is there a way to test injector leak down? My fuel lpnes...
Detroit series 60. Turns over great. But takes 5-10, longer when it's cold out, before it starts to "fire", and even once it begins to hit, it...
Maybe egr cooler. Saw it on an isx, vibrations caused a it to crack where the clamp fit the two pieces together. Just a thought. Also like said...
Correct. I found the problem. Rebuilt/cleaned the compressor head, and all is good! Thanks for everyone's help!!!
Awesome. Thanks for the responses. Im in the process of swapping out tuec1/4" line just to be safe. It is a d detroit egr s60. So at least now I...
This is sort of an update to my air dryer purge problem. Ive plumbed shop air to my hose that comes out of the compressor. I start the truck, and...
Just looked for the check valve on dryer. Can't find anything. Maybe the style that bolts directly onto the air tank doesnt have it? I pulled the...
It has the screw on cartridge, but no "cover" over the cartridge.
I will check for the check valve on the dryer. Maybe somebody has put the wrong cartridge on it? Could that cause this problem? And as for the...