Some have NO filter at all. Crazy to think that a machine that you spend 3000 hours a year in wouldn't have a filter. Peterbilt takes 10 seconds...
Ooops... Habit I guess, it's a C13.
LOL "driver rewards"... ** Slave wage reparations. There I fixed it.
I can't find anything in the search about checking/changing the breather on a 2006 C13. Im assuming it started blowing the filler cap off because...
Thank you sir. [ATTACH]
Those 3000 hp motors run for about 15 seconds then shut down, they also have HUGE turbos and only 60-70 PSI so they don't heat the air too much....
They are bolted in two different spots. [ATTACH]
I am in the shop now. 18:1 with twin 625 turbos (both the big ones) got 330K with 770HP and 2400Tq to the rear wheels. Never had any issues until...
I ran only team loads when I had a reefer (w/no co-driver). Pay is 1.5 times as much to run the same load if the truck has to average 60 MPH over...
Sorry, I haven't been on in a while. It ended up being the lead power wire from the key to the fuse block. It had been pulled out at some point...
BUMP** I have been regrooveing my tires for years, no problem at all..... Until now. I was getting a level one in California (of course) and CHP...
Yes... Much better ride. When I hit a big hole or uneven bridge approach, the steering wheel used to shake and rattle, now its a solid thud. The...
Same story here... Paid for them in May.... On the phone every week for nearly four months. "One of our machines broke so we are behind on...
Im going to try to get the KW dealer to find my printout. I never got it, the guy that built the engine did. Its a complicated money i still owe...
Single Stage, very little of the block is actually visible anyway so its not important for the shine to be perfect. Just important that it sticks.
I guess the answer is: Nobody really has a real max number for HP or Torque that I can put to the ground for a few reasons. 1). I guess there...
Its powder coat/jet coat on all the brackets, covers, mounts, and turbos and regular Imron truck paint on the block and head.
Only on the dyno when it was built, its been in "break-in" mode since. Im asking about transmission and rear end issues because the guy that built...
So, 550divided by 3.36? So, 5500 divided by 3.36? Thats only 1600 pounds, my truck absolutely runs away from stock 550 HP Cummins all day long. I...
Not much to show ( I run in California so no smoke ) but I tried to make it purdy. [ATTACH]