If it's running it should bleed through on its own. Just make sure its not sucking air
I like your comment 'driver'. Probably don't even know what I'm talking about. Oil is oil or so they say?
Don't use 90w you will ruin the spacers between the dogs and gears. Don't overfill it
Disposable Do not use too often. Keep out of direct sunlight.
It could be the rockershaft, the only place I can think of where there is oil involved. Especially behind the fan bracket.
Theres a problem with that mounting it should be tight. Have a look at the rear mountings aswell. Had the same problem with a Freightliner....
Could be a fuel pressure issue, have a look at the little sieve on top of the fuel pump. If it's clean have the pump calibrated at a shop.
Sounds like its pulling air on the fuel supply. Check all the fittings from the pickup to fuel pump. Especially the o ring on the filter.
Nothing wrong with a Big Cam Cummins. They are a bit thirsty, and like to be run a bit higher rpms than the CATs.
I agree with Condodruiser, when you put pressure on the clutch and it goes away have a look at the release bearing. Sometimes the Fuller boxes...
Dito on the governor valve.
What motor? Out of couriosity.
No sweat Rudy, have a look on the inside of the valve cover. Good luck on your quest.:biggrin_25524:
That's the one. No need to split the pump and compressor, its a bit heavy but doable. There isn't timing on the compressor and pump. It has a...
That's not my intention, I'm only thinking, I would like to give advice maybe Rudy can tell us why he wants to know the location of the no2 injector.
How will he know how to replace the jakes and set the injector, if you don't even know where it is. Leave it to the pro's.
It isn't such a big deal to remove the compressor and fuel pump. If you have the right 5/8 C spanner, it's almost impossible without that magic...
It's not just a cover, there are rollers on the inside. If you can find the same thicknes gasket you can take it of. If not leave it, you will...
Any tips on priming a Ser60 after the head and injectors were removed?
Why do you need the left knee, if you can use you're right pinkey?
