I had a 94 DD 60 that threw random codes that made no sense . rough idle and had a miss at times. turned out to be injector harness. insulation wore or cracked allowing oil in.
03 6NZ CAT Vibration
Discussion in 'Trucks [ Eighteen Wheelers ]' started by largecar1, Dec 29, 2011.
Page 2 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Could even be worn pilot bearing but that doesn't address the codes.
-
how do you back the clutch out?
-
After a full day at CAT we changed the coolant temp sensor that feeds the ECM. That has seemed to help so far. No more shake rollin down the road.. #1 injector is still dead at idle when warm. Only at idle. So I'll try changing the injector harness and see what that does.
-
My 6nz did the same with code 42 changed cam n crankshaft sensors and new wire harness. It was the idler gear was jumping the time 2 teeth
Last edited: Apr 7, 2013
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 2 of 2