2007 International 4200 AC issues

Discussion in 'International Forum' started by trent001, Jan 6, 2021.

  1. trent001

    trent001 Bobtail Member

    6
    1
    Jan 6, 2021
    0
    I have a 2007 International 4200 with a VT365 engine.

    Recently while driving the check AC light came on and I no longer had working cold AC. I read the codes from the dash and it flashed two fault codes.

    1:7
    613_14A

    150:1
    2023_14P

    I believe the first one is active and for low refrigerant?

    When the engine is running with the AC on max the compressor clutch is not kicking on. If I do a jumper wire and hook the compressor to 12V the clutch will engage. I have already put one can of R134a into the system and am having the same problem. Should I add another can? How much does the system hold?

    Any other suggestions/ideas? Is this the correct approach?

    @Heavyd
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. trent001

    trent001 Bobtail Member

    6
    1
    Jan 6, 2021
    0
  4. Heavyd

    Heavyd Road Train Member

    7,115
    5,240
    Feb 4, 2009
    0
    AC on those is computer controlled. I would get the codes read by a proper scanner and troubleshoot from there.
     
    Farmtractor9900 Thanks this.
  5. trent001

    trent001 Bobtail Member

    6
    1
    Jan 6, 2021
    0
    @Heavyd as you suggested I purchased a Nexus NexLink NL 102PLUS. My problem now is that is does not turn on or read. I can plug it into other vehicles and it works just fine. Now what?
     
  6. Heavyd

    Heavyd Road Train Member

    7,115
    5,240
    Feb 4, 2009
    0
    Never heard of that. We use Nexiq USBLINK-2 on our laptops running Diamond logic builder software.
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  • Draft saved Draft deleted