2010 cascadia dd15 active faults problem

Discussion in 'Freightliner Forum' started by Farmers Wife, Nov 6, 2013.

  1. Farmers Wife

    Farmers Wife Bobtail Member

    12
    4
    Nov 6, 2013
    Northampton, PA
    0
    We just traded in our old 2003 century for this 2010 Freightliner cascadia with dd15 engine and have 2 active faults that cannot be cleared. Here are the codes:

    sam controller
    sht lo 249s254 04

    sam sa33 spn520908 04

    i would appreciate anyone's input as to if these mean that something serious is wrong. We just had a pm done to the tune of $500 and I really can't afford to take it to a Freightliner dealer at this time. Of course we will take it if something is seriously wrong but just trying to find out some info.
    thank you
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. SLCTrucker

    SLCTrucker Medium Load Member

    404
    199
    Jan 15, 2009
    Salt Lake City UT
    0
    I think its a bulb somewhere...
     
    Farmers Wife Thanks this.
  4. Farmers Wife

    Farmers Wife Bobtail Member

    12
    4
    Nov 6, 2013
    Northampton, PA
    0
    Thank you for the reply, there is a bulb out on the drivers side courtesy light but haven't been able to figure out how to get the cover off to replace it. Would anyone know how to get the cover off or is there another way to replace the bulb? Thank you
     
  5. Chip S

    Chip S Light Load Member

    200
    104
    May 27, 2013
    Texas
    0
    33-520908-4 is the code for the mirror heat fuse not seeing voltage. Check fuse F27 and fuse F7 in the sam cab (behind the glove box). The 249s254 04 is also mirror heat (same code). The reason there are two different codes, is because the sam cab sends out fault codes in two different formats, and the ICU picks up both codes being sent out. No reason to stop and worry. Just check the fuse when you have some down time
     
    Farmers Wife Thanks this.
  6. Chip S

    Chip S Light Load Member

    200
    104
    May 27, 2013
    Texas
    0
    To change the driver side bulb, just gently pull lens on the light and you will get access to the light
     
    Farmers Wife Thanks this.
  7. Farmers Wife

    Farmers Wife Bobtail Member

    12
    4
    Nov 6, 2013
    Northampton, PA
    0
    Thanks Chip, we will check the fuses when we get a chance. The drivers side mirror heat isn't working as we found this out a day ago. And thanks for the info on replacing the lite bulb. I really appreciate the help! :)
     
  8. Chip S

    Chip S Light Load Member

    200
    104
    May 27, 2013
    Texas
    0
    You're welcome. Good luck!
     
    Farmers Wife Thanks this.
  9. Farmers Wife

    Farmers Wife Bobtail Member

    12
    4
    Nov 6, 2013
    Northampton, PA
    0
    Chip, you were so right! Fuse # F27 wasn't even there! Put fuse in and mirror works and faults were deleted! Thanks again so much for the help! :)
     
  10. Chip S

    Chip S Light Load Member

    200
    104
    May 27, 2013
    Texas
    0
    Great! Glad I could help
     
    Farmers Wife Thanks this.
  11. singh0608

    singh0608 Bobtail Member

    2
    0
    Jul 23, 2014
    0
    Plz help I have 2010 freightliner cascadia and I have 4 codes on
    Sht 249 s 254 04
    Eng Sht hi 128 s 272 03
    Sam sa33 spn 521303 04
    Eng as00 spn 002630 03
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.