2010 International Prostar Dump Valve Blinking

I had my 2 solenoids replace for the air suspension now my air builds up when the dump is on and in park but when i take off i loose all bags until stop again... its not building up at all when the dump if off

 

I need replaced solenoids for the susenspion now air build up when dump is on and build up nothing when air is dump isnt on..Helllpppp?

 

Make sure they used solenoids part number 2506712C91 and that the little shuttle valve in between them is pointing down.

 

Yes thats what it was. Thanks, now air bags up to where it set on leveling valve.. when im bobtail.. when loaded they are not and you can hear air being pushed back out of the leveling vavle... i just changed it last year

 

Was anything disconnected back there?

 

Have same issue , replaced complete solenoid pak , switch is not flashing anymore but air bags will not air up.I have no air coming out of the solenoid pak with the dump switch in normal postion when switch put in dump air comes out of the dump solenoid. HelpPPPPPP

 

Should be a little "T" valve that connects between the two solenoids for the dump function with an air quick connect and this air line goes to the dump port on your leveling valve.

 

Heavy, with the power divider, does that run through the same solenoid pack? Mine is not locking in, thought it was the cold, but it is not. Rarely use it as I have lockers too, which work when I have been in those situations. Thanks!

 

Depends how the truck was ordered and what other air accessories you have, but it probably is.

 

Hi, does anyone know what would cause all of the auxiilary toggle switches to flash at the same time and not work on a 2004 international 7400 ? Thanks in advance!

 

Remote power module is not communicating.