Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

2011 prostar wiring issue?

Discussion in 'International Forum' started by K1500, Apr 20, 2018.

  1. Apr 20, 2018 #1
    K1500

    K1500 Bobtail Member

    5
    0
    Apr 19, 2018
    0
    Blend door and vent door do not work. I replaced the main switch itself I replaced both of the actuator motors that turn the doors and they just dont work. I've check all the fuses that I have on fuse board there and I've got no idea what else to look at? Anyone have any ideas? Is there something under the hood I missed maybe?
     
    K1500, Apr 20, 2018
    K1500, Apr 20, 2018
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Apr 20, 2018 #2
    vicdsm

    vicdsm Bobtail Member

    28
    8
    Mar 10, 2009
    new york
    0
    im having same issue , try this just to see if it moves after reset.. with key on position engine off,,their are a few fuses that say for body controller and also hvac pull and reset and listen for the actuators to cycle. im having same issue. also try swapping around the ignition relays (same part numbers) and number them with a marker see if that helps and keep track of a possible bad ignition relay(doubt it is the cause cause they seem to supply various circuits)
     
    vicdsm, Apr 20, 2018
    vicdsm, Apr 20, 2018
    #2
  4. Apr 20, 2018 #3
    K1500

    K1500 Bobtail Member

    5
    0
    Apr 19, 2018
    0
    Thanks for the suggestions! I'll do that when I get back home next week!
     
    K1500, Apr 20, 2018
    K1500, Apr 20, 2018
    #3
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.