Getting my 77 282 v6 going again, will post pics/updates along the way.
For now, In need of some parts if anyone here can point me in the correct direction or have some laying around that would be greatly appreciated.
1- Clutch cable
2- LH hydraulic tilt cab latch. Need the piston cylinder rebuild kit or whole assembly
Once I get those squared away she should be drivable again.
282 Pete
Discussion in 'Peterbilt Forum' started by 282 Pete, Aug 23, 2024.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
@SmallPackage and @wore out might be able to steer you in the right direction.
SmallPackage and 282 Pete Thank this. -
Facebook Marketplace seems to be the new place for selling trucks. Quite a few 352/362, but not many 282s. You can try Wheels of Time, they have a classified section.
American Truck Historical Society – Backlot Classifieds282 Pete Thanks this. -
201 Thanks this.
-
Clutch cable can be made of you can find a shop that builds them. In these parts that is a place called San Antonio Brake and Clutch. They also do speedo and tach cables. The cab lift and latches are gonna be hard to source. My ‘73 352 pump and lift assembly is mia. Someone else “borrowed” it years ago. The pump should be able to be rebuilt by a hydraulic shop or if you have a bearing and seal supply store you might try it yourself and get them to match up the parts.
282 Pete Thanks this. -
Also you may already know about them but Courtland Truck Works in Courtland Ca. may have some parts. They have saved, collected, and restored many old Petes over the years. They have many acres of them. Very knowledgeable on vintage Petes. It is very hard to get them to answer the phone tho. Lol. So don’t give up.
282 Pete Thanks this. -
SmallPackage Thanks this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.