3406b fuel feed lines

Discussion in 'Heavy Duty Diesel Truck Mechanics Forum' started by animalv, Dec 12, 2018.

  1. Dec 12, 2018 #1
    animalv

    animalv Bobtail Member

    5
    0
    Jan 28, 2018
    0
    • I have a 3406B and want to go to bigger fuel lines from tank to pump I was thinking -10 from tank to primary filter then -8 everywhere else, also thinking of going from a -4 return to a -6 or -8 and dumping into the pass tank it draws from the drivers tank. What is the return rate on the fuel? Thank you
     
    animalv, Dec 12, 2018
    animalv, Dec 12, 2018
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Dec 13, 2018 #2
    wore out

    wore out Numbered Classic

    17,375
    215,847
    Jun 5, 2013
    CHASIN THE DEVIL'S HERD
    0
    A B returns very little fuel. Also the return fitting on the back corner of the pump is actually a special fitting that only allows so much fuel to pass. It does look like a normal fitting till you look in the end with a light shining in the other.

    The should have 5/8 inside diameter lines all the way to the lift pump.
     
    wore out, Dec 13, 2018
    wore out, Dec 13, 2018
    #2
    SAR, Oxbow and OLDSKOOLERnWV Thank this.
  4. Dec 13, 2018 #3
    SmokinCAT

    SmokinCAT Road Train Member

    1,773
    1,488
    Oct 20, 2010
    Hillsboro, OH./ Adrian, MI
    0
    There is no use in changing the lines after the transfer pump either, the fitting is the restriction where it enters the pump, larger lines gain you nothing.
     
    SmokinCAT, Dec 13, 2018
    SmokinCAT, Dec 13, 2018
    #3
    SAR Thanks this.
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.