3406b missing allen screws from pump??

Discussion in 'Trucks [ Eighteen Wheelers ]' started by seth Pivarnik, Nov 7, 2015.

  1. seth Pivarnik

    seth Pivarnik Light Load Member

    104
    3
    Nov 7, 2015
    0
    Welp still running the same after I pulled it
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. 062

    062 Road Train Member

    6,351
    34,023
    Oct 20, 2013
    0
    Only other thing you could do roadside,that I can think of is,take pliers or vise grip and squeeze the return line. See if that smooths it out. Doubt it will,but you never know.
     
  4. seth Pivarnik

    seth Pivarnik Light Load Member

    104
    3
    Nov 7, 2015
    0
    Yeah I'll give it a shot. But if not any I idea what else it could be? Thinking something inside the injection pump? Possible the new transfer pump is a crapped out already
     
  5. Prom Night Dumpster Baby

    Prom Night Dumpster Baby Medium Load Member

    646
    473
    Jan 12, 2012
    Bug Tussle, TN
    0
    If you put a fuel pressure gauge on the hand primer that would tell you a lot. I like the old non-electric gauges. Probably need a snubber too. I found a needle valve that does the trick at Lowe's or Home Depot.

    Do you buy fuel at the same place or all over? You never know when you might get an oyster out of the fuel pump and some of 'em will clog up the FWS right at the top, won't even fit down inside!
     
  6. seth Pivarnik

    seth Pivarnik Light Load Member

    104
    3
    Nov 7, 2015
    0
    I know I need one but I don't have one. I loosened the secondary filter and fuel squirted out under pretty good pressure with the engine off. I buy fuel all over. I just don't get how she just dies the. Barely runs now man. Sounds like its on 3 cylinders. And can't keep idle without me touching the pedal
     
  7. SmokinCAT

    SmokinCAT Road Train Member

    1,773
    1,488
    Oct 20, 2010
    Hillsboro, OH./ Adrian, MI
    0
    While it is running try and crack the feed line into the injection pump, it sounds as though it has no fuel pressure whatsoever.
     
  8. seth Pivarnik

    seth Pivarnik Light Load Member

    104
    3
    Nov 7, 2015
    0
    Okay so its running again. Had to get it started to release the brakes so i could get pulled outta the mud and after running rough for about 15 secs it ran normal its like I lost prime will I was driving. I must of had water or contaminates in my filters that restricted fuel??
     
    Last edited: Jan 1, 2016
  9. seth Pivarnik

    seth Pivarnik Light Load Member

    104
    3
    Nov 7, 2015
    0
    Also I'm running NAPA filters so I guess I need to go to cat filters ?
     
  10. SmokinCAT

    SmokinCAT Road Train Member

    1,773
    1,488
    Oct 20, 2010
    Hillsboro, OH./ Adrian, MI
    0
    Cat or fleetguard.
     
  11. seth Pivarnik

    seth Pivarnik Light Load Member

    104
    3
    Nov 7, 2015
    0
    What filter #s do you recommend
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.