3406b missing allen screws from pump??

So the screw hole farthest away from the block does torque rise? Also I couldn't fit a 3/8" socket, 1/4 drive threw the opening to get the screw that was still in there. It's like the opening tapered down

 

Yeah it fits on the side where the Allen screw is already pulled but not on the one that's still in there. I'll see if I can't find a thinner walled socked. Okay sounds good I plan on getting it done this week. Thanks for the offer, wish I could make it out there but only running regional with the truck til I get this issue straightened out.

 

Okay I'm replacing the diaphragm as we speak and thank you it had a half inch tear in it but when I pulled mine apart there where no orings in there. I got 2 when I with I bought the new diaphragm. Should I just put it back with the new diaphragm and not the new orings since there wernt any in there? Thanks for your help

 

So I just put it all together with the new diaphragm and took it out for a run Bob tailing made 14 lbs Bobtailing so hopefully it will be higher with so weight on it. But it boost up to 14lbs then just stops. But I'm heading out on a run tonight so we'll see how she does

 

I just pulled the springs out of the housing anjust let the housing kind of hang on there

 

I just pulled the springs out of the housing anjust let the housing kind of hang on there

 

Nos the truck doesnt shut off though