3406e 40 pin ecm

not on this site.

 

Thanks for the reply !

 

Try to see if you can find him at The Diesel Garage, he stops by every now and then.

 

Me Haney I have a 3406e 5ek in a 1994 w900 and it jade the 10r8502 injectors and the 800hp marine cam and a bully dog turbo I am getting a new ecm for it the old one went bad and the need a motor serial number to flash it do would you happen to know of a serial number that would give me around 725hp

 

Kinda brought up an old thread. But was just wondering if anyone had a 410hp 5ek with interlock of 30 flash file. Or low interlock anyway. Thanks!

 

Email me at misu19720@yahoo.com i can give you his info

 

@991lw ive got a 5ds cat. Been trying to find someone that can tune the ecm right. But I only want someone that has experience with these 15.8ls. From what I’ve read mrhaney knows all about these. Do you think he’s possible to get ahold of and still interested in tuning?

 

5ds is basically a 5ek but with a bigger stroke crank and 5.5 inch liners and pistons instead on 5.4. it has the same cam and injectors as a 550hp 14.6 ltr. the turbo has a bigger turbine housing.

other than that they are basically the same engine. anyone that can trick up a 550 5ek can do your 15.8 5ds

 

I was needing to get in touch with mr Haney to have my ecm tuned and was wondering if I would be able to get the info

 

Just wondering what numbers on a cat 40 pin is the positive wires