3406e CAT issue/question
Discussion in 'Trucks [ Eighteen Wheelers ]' started by Pete379Cat, Oct 1, 2011.
Page 3 of 4
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
one more thing check and see if someone messed with the sensers. if its a 2ws serial# e-model it has 2 timing sensers one on the cam and one on the crank. the crank senser will be under the air comppreser on the block toward the bottom.if this dont solve the problem i still would say an injector acting up.
-
This motor does not have the sensor on the crank.
And thank you for all of your quick replies ... -
-
After mine was inframed the cam timing gear was installed one tooth off and had the exact same symptoms as yours. After reinstalling the gear it quit doing it.
Pete379Cat Thanks this. -
Hubby's heading to Peterbilt today to visit a mechanic he's been talking to about it & plans to ask him about it, as well as show him injectors.
Thanks to you all -
When mine was put together it was one tooth off and it did smoke miss and loped when idling... put it back right and fixed the issue, but mine is a 1Lw
Pete379Cat Thanks this. -
So far it is NOT smoking or missing out like it was before. Crossing our fingers that it is fixed!
Thanks to all of you for your replies & suggestions!! -
-
So far, so good...
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 3 of 4