3406e shuts down while driving

Trial and error time. Looks like you've isolated the issue to the dash. Just gotta keep going with the wiggle test until you find the break. I doubt the start button is the issue. IIRC that button only energizes the starter relay for start up. It shouldn't have anything to do with supplying a signal voltage to the ECM.

 

There is a small fuse block behind the dash to the right of the steering column, it has the fuses related to the ECM. You could try wiggling those wires to accelerate your troubleshooting.

I have posted a picture in a thread of my 97 379 fuse block and a description of the fuse circuits in this thread:
http://www.thetruckersreport.com/tr...-behind-instrument-panel.306010/#post-5047906

Hope it helps.

 

Hello, I am having same problem with my truck. Please let me know which solenoid did you charge?

 

Hello, I am having same issues with my truck. Please let me know which solenoid did you change?
Thank you

 

breaker in fuse block

 

My engibe sgot down on while driving
And truck never start again I thought is fuel issue I spent 2 day on shoulder on i 20
And i change fuel pump anything happened
Then i pudh the clutch and try to start it and truck start but when i take my fit out from the clutch truck shots down if i want the engine running i have to hold the clutch down what u guys think my problem is?