362 wiring

Follow the wiring harness out of the turn signal....It's the yellow wire, it should be stuffed somewhere under the dash or behind the dash gauge panel....What year is your 362?....

 

Rgr that....The 362 I used to drive in the avatar had a Cat, dbl bunk, A/R, w/13 over, was a nice truck....I've got an '86 362 now w/a 315 cummins, 9 spd, spring ride....Tough gettin parts now for them...I just had the shifter totally rebuilt, took it to a machine shop where they basically built a new one...The slop was getting so bad, I couldn't grab rev.....

 

No, front end's still pretty tight, just over 900k....433's are low, what size rubber you running, 22's or 24's......24's will give you a little more top end....What does it have for gearing?.. Keep those two grease fittings on the shifter linkage greased, they're real easy to overlook...

 

Rgr that, sounds like a plan....One grease fitting is on the shifter box, bolted directly under the dog house, the other one is on the underside (hidden) of the horizontal linkage bolted to the frame rail....Machine shop did a good job rebuilding the linkage, tightened it right up and I re-bushed the mounting bracket, put it all back today....You find the flasher relay ok?...Let me know how you make out adding the A/R, sounds good.....My problem is, I just don't have the time right now to do what I really want too....