6TS computer on 1LW

was the 6ts a 550 if not may not be getting enough fuel

 

Chances are the ecm from the 6TS is from a configuration with bigger injectors. You can run the ecm fine but your probably down 100hp even if the 6TS the ecm came off was also rated at 550hp. If its rated at 475hp your gonna be down a significant amount of power, this is why your experiencing low boost.

Have the ecm flashed to a 550 1LW file or a 600 5DS file and you'll be good to go.

 

yup....6TS should have had 58 injectors stock instead of the 57's. The 6TS program you are using is designed for injectors that flow 25% more fuel......so you are down on fuel 25% with the smaller injectors.

 

He'll need the proper flash file as well as a password creator and the know how to do it.

Good chance if when you ask him if he can flash your ecm and he asks how he would do that, hes not gonna be able to.

 

Not possible.

You are prompt to put the password into the ecm after the flash file has been installed and until you put it in the truck will only idle