ABS Lights

A bad seal can cause the abs light to go on.
Can try pulling the plug to the trailer. Re install it. Get good contact. Sometimes it's only a problem at the plug.
Can also try shutting truck off. Reset computer. Start back up. Might start up and not come on again.

 

Don’t worry about it to much. Once the trucks start driving themselves the shop guys will actually have to come to the yard and fix it.
I can already start counting all the money that will be saved on driver labor…

I mean really, what decision is one of these robot trucks going to do when there’s a malfunction?

 

Duct tape over the light

 

Ive had them do a walk around during a level 3. I think it was a level 3. After the walk around and having me step on the brake and turn signals and stuff, he climbed up driver steps and checked for the ABS light on the dash. If the yellow trailer ABS light is off and the one on the dash is on, you have an inoperable ABS light. AKA he doesn’t need to crawl under the truck to check that the light is working.

 

I'm curious to know.
I was told, if the ABS trailer light is on, you might get a 15 day fix-it warning. If the ABS trailer light does not come on at all that is an OOS violation.