Accert Muffler

Discussion in 'Trucks [ Eighteen Wheelers ]' started by barkys, Dec 14, 2011.

  1. Dec 14, 2011 #1
    barkys

    barkys Bobtail Member

    27
    4
    Jul 28, 2009
    battle lake,mn
    0
    Was wondering if you could cut the end of the muffler on a 07 t600 and stick a flow thru in there and weld it back on or are there a bunch of baffles in the way inside there?
     
    barkys, Dec 14, 2011
    barkys, Dec 14, 2011
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Dec 15, 2011 #2
    N14 cummins power

    N14 cummins power Bobtail Member

    38
    2
    Dec 1, 2011
    Lampasas tx
    0
    I heard u couldn't just as easy to buy a cheap free flow muffler!!Could go with the walker megaflows or the Donaldson muffles I heard both of them are very good and would see lots of difference!!
     
    N14 cummins power, Dec 15, 2011
    N14 cummins power, Dec 15, 2011
    #2
    SHC Thanks this.
  4. Dec 15, 2011 #3
    DL550CAT

    DL550CAT Road Train Member

    1,427
    1,483
    Oct 18, 2009
    Waynesburg, Pa
    0

    With a lot less work.
     
    DL550CAT, Dec 15, 2011
    DL550CAT, Dec 15, 2011
    #3
  5. Dec 15, 2011 #4
    rollin coal

    rollin coal Road Train Member

    13,706
    28,218
    Mar 29, 2008
    TN
    0
    I've heard of guys knocking them out somehow. I looked at mine when I pulled them off and thought better of it. Knocking the baffles, or cutting the welded seems and getting them out seems like a lot of wasted effort as cheaply as a set of donaldsons or walkers could be had for from practically any parts house.
     
    rollin coal, Dec 15, 2011
    rollin coal, Dec 15, 2011
    #4
  7. Dec 16, 2011 #5
    barkys

    barkys Bobtail Member

    27
    4
    Jul 28, 2009
    battle lake,mn
    0
    I wanted to put the other muffler inside the stock one which is 13" in dia.
     
    barkys, Dec 16, 2011
    barkys, Dec 16, 2011
    #5
  8. Dec 16, 2011 #6
    SHC

    SHC Spoiled Rotten Brat O/O

    8,484
    7,047
    Feb 26, 2011
    Westville, IN
    0
    Can you explain if your truck is a DPF truck or not??

    Are you talking of replacing the catalystic convertor or the actual mufflers??? As your truck has both.

    I had a 2005 IH 9400i that only had a rear mount muffler but it was the large size like you speak of and I just got a high-flow Donaldson and had custom straps made (cost me $125 for the muffler and $75 for the straps in stainless)
     
    SHC, Dec 16, 2011
    SHC, Dec 16, 2011
    #6
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.