Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

After treatment wire harness

Discussion in 'Heavy Duty Diesel Truck Mechanics Forum' started by johnnyboyloco2500, Sep 12, 2019.

  1. Sep 12, 2019 #1
    johnnyboyloco2500

    johnnyboyloco2500 Light Load Member

    67
    12
    Dec 7, 2015
    Lebanon,Oregon
    0
    so does any one know were after treatment main wiring harness is at. I got a clue . But any info will help me . And were could i get that cheaper than dealer
    Thanks
     
    johnnyboyloco2500, Sep 12, 2019
    johnnyboyloco2500, Sep 12, 2019
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Sep 12, 2019 #2
    uncleal13

    uncleal13 Road Train Member

    3,757
    6,199
    Apr 9, 2009
    Humboldt, Sk
    0
    Need to tell us what kind of truck and engine you have. Otherwise there are over a half dozen different possibilities.
     
    uncleal13, Sep 12, 2019
    uncleal13, Sep 12, 2019
    #2
    Heavyd Thanks this.
  4. Sep 12, 2019 #3
    Goodysnap

    Goodysnap Road Train Member

    3,502
    8,384
    Jul 12, 2017
    0
    You will not likely find an aftermarket harness no matter the truck make as they are chassis specific in most cases. Sorry, but your stuck with paying the dealer if this is the part you wanna wing at it.
     
    Goodysnap, Sep 12, 2019
    Goodysnap, Sep 12, 2019
    #3
    Heavyd, AModelCat and pushbroom Thank this.
  5. Sep 12, 2019 #4
    tommygun58

    tommygun58 Light Load Member

    88
    61
    Sep 22, 2015
    East Texas
    0
    Google custom wiring harnesses. I found a place online a while back. You can save a little money , but downtime will hurt. YOU have to send them your old one..
     
    tommygun58, Sep 12, 2019
    tommygun58, Sep 12, 2019
    #4
  7. Sep 13, 2019 #5
    johnnyboyloco2500

    johnnyboyloco2500 Light Load Member

    67
    12
    Dec 7, 2015
    Lebanon,Oregon
    0
    Ok thanks
    2012 isx in 2013 pete 386
     
    johnnyboyloco2500, Sep 13, 2019
    johnnyboyloco2500, Sep 13, 2019
    #5
  8. Sep 13, 2019 #6
    QUALITYTRUCK

    QUALITYTRUCK Road Train Member

    1,780
    1,726
    Jun 14, 2009
    romulus,mi
    0
    Right above starter there is a square plug that you have to cut 4-5 zip ties to get at. Harness that I think you are talking about starts at this plug and goes to rear along driver frame rail. It is a large,expensive harness. Aftertreatment is controlled by engine ecm. No separate ACM on 2250/2350.
     
    QUALITYTRUCK, Sep 13, 2019
    QUALITYTRUCK, Sep 13, 2019
    #6
  9. Sep 14, 2019 #7
    johnnyboyloco2500

    johnnyboyloco2500 Light Load Member

    67
    12
    Dec 7, 2015
    Lebanon,Oregon
    0
    Ok thanks
     
    johnnyboyloco2500, Sep 14, 2019
    johnnyboyloco2500, Sep 14, 2019
    #7
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.