Change the dump valve or exhaust valve mounted on same bracket as leveling valve facing back of truck. air is fed to leveling valve thru this valve.
Air bag over-inflation
Discussion in 'Peterbilt Forum' started by Money-Mike, Nov 19, 2020.
Page 2 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
This is the valve Im speaking of this is on my 93 same as my 94
-
Small round valve lower left corner
-
Although my 91 has almost like an old style tractor protection valve on the driver side frame rail right in front of the front drive
-
-
So that's what I'm working with.
Pic is of bags deflated, the arm is slanting up to the right. If I inflate it goes to dead straight across and cuts off like it's supposed to. After I drove for a little while, it slants down to the right, continuously exhausts from the clear hose but the bags never deflate down to level. -
We have also replaced the distribution valve thats up near the front drives and catwalk, no change
-
Look inside frame rail just in front of your front rear for a valve mounted on a step out bracket
-
I'm at home now. I've got to run a load of scrap concrete in the morning, so I'll look for that valve as well.
-
Was this fixed? I'm having the same problem on my 579
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 2 of 2