I have a 07 9400i with an a/c problem.evacuated system.replaced expansion valve and dryer receiver.recharged system.air was so cold I could not run it for very long periods of time.seems like overnight,it wont blow cold,everything working,compressor,fan.everything.cant figure out why all the sudden,warm air.can someone help me?
air conditioner
Discussion in 'International Forum' started by cjtrucking, Jun 17, 2014.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
sounds like a leak in the system somewere
-
Have you cleaned the condensor, sounds like its freezing up.
-
Have you had an a/c shop check it out for you or just doing yourself? Had the same problem but it was the expansion valve and you have had that replaced.
-
If the compressor is running and engine fan cycling, feel the a/c lines under the passenger door. Is the line with low side test port nice and cold? Did it quit working all of a sudden, or does it work and then die out?
-
Could it be that the clutches in the compressor are worn and it is not working properly.
-
It quit working all the sudden.
-
Replaced expansion valve and reciever dryer.it worked beautiful.then just quit
-
Do you know if it has an "APADS" module on it? It is usually mounted on the firewall on the drivers side near the coolant tank. It will be a small block with a red and green LED on it.
-
Only other thing I could think of is the low pressure switch. Need to clean between the condenser and radiator. Or the filter in the orifice tube could be stopped up. Have you had dye put into the system to see if it is leaking anywhere? Or it could even be the belt slipping. Just let us know what is the problem when you get it fixed. As I asked before are you having an actual AC shop looking at it or are you doing it yourself?
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.