air ride height

Discussion in 'Volvo Forum' started by gregor, May 14, 2011.

  1. Boromak18

    Boromak18 Light Load Member

    62
    11
    Jan 11, 2018
    0
    What kind of vibration you have? All the time or only on specific rpm, my truck have vibration problem from 40 to 45 and fron 50 to 60 like all front of truck is shacking and stering weickle is shacking to.
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Boromak18

    Boromak18 Light Load Member

    62
    11
    Jan 11, 2018
    0
    my truck have vibration problem shacking the front of the truck and stering weickle too, can ride high cause this problem if is not right?that happen only when driving 40 to 45 and 50 to 55
    Bob tell or loaded , when loaded is more strong vibration




    my truck have vibration problem shacking the front of the truck and stering weickle too, can ride high cause this problem if is not right?that happen only when driving 40 to 45 and 50 to 55
    Bob tell or loaded , when loaded is more strong vibration
     
  4. juanmiherrera

    juanmiherrera Bobtail Member

    1
    0
    Sep 19, 2018
    0
    How do you take the measure on the tires? from the bottom on the ground to the top?
     
  5. Snailexpress

    Snailexpress Road Train Member

    2,675
    6,069
    Apr 28, 2014
    Rocky
    0
     

    Attached Files:

  6. tricoastal123

    tricoastal123 Bobtail Member

    2
    0
    Jan 5, 2019
    0
    The tire size doesn't matter either 22.5 r 24.5 ,,,Any VNL volvo 64T SEREIES air ride height should be measured from the bottom of the frame to the center of the axle where you can see welding joint and it should not be less or more then 8 inches.
     
  7. RoadRanger^^

    RoadRanger^^ Medium Load Member

    314
    116
    Apr 17, 2018
    Columbus, OH
    0
    Hello good people. I was reading the whole thread about this ride height. My Volvo vnl 670, 2011 its vibrating for some reason i checked everything from driveshaft, u joints, yokes. New front springs, 10 new tires drives kelly’s and steer yokohama. New fuel pump on it. There is nothing that i can notice is loose. Like some of you guys said i went today on the lot to measure it and rear airbags from the welding to bottom of the frame 8 3/4 almost 9 and front airbags from welding to bottom was 8 1/2. What do you guys think maybe my ride is too high and cause this vibration coming under my truck and noise. Its noticeble in 6th gear and up it freaks me out everytime. I feel something will break anytime. I will also send a pic to show if my measurment is right. Thank you any andwer or opinion is welcome. Have a blessed day.
     

    Attached Files:

  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.