All this talk about Cats....

Wiseone should tell it openly to everyone so that others know what you are not allowed to do here.

 

Reading the rules will tell you what you are not allowed to do.

 

I removed his ban and talked with him. I cannot answer all the PMs I got because if I did, I would break my arm and fingers. There just is no way I can and have time to do anything else. I think DDS is a good poster, and so I have reinstated him. I cannot remember what even happened on this one actually as I was eating turkey yesterday and had quite a few beers, haha.

 

Thanks wiseone we appreciate that!

 

Thanks for all the support, I think it was just a mistake. I'm back and thats all that matters. Lets get back to some Cat horsepower!

 

I was a bit worried there for a while,Just starting to sort this truck out and it all came to a end

 

Have you installed that new pyro yet, The W/S I am working for the gauge reading 200 deg high has not been back yet. The new pyro is at W/S just have to pick it up.

 

I thought it was a simple plug the new one in but its a bit harder than I thought,I cant get the old plugs out will have to get a sparkie to look at it.

 

Does it have a two pin weather pack plug or does it have two small screws and nuts. You may have to cut the heat shrink off to get to the screws and nuts.

 

It runs all the way over to the left hand side of the cab to a bank of plugs,
looks like you have to push out the old plugs and push in the new plugs.
I just didnt want to cut the wires and push the old ones out if this is not the right way to do it.