antenna help

Discussion in 'CB Radio Forum' started by stroker22, Feb 2, 2013.

  1. stroker22

    stroker22 Bobtail Member

    17
    0
    Feb 2, 2013
    0
    Hi all im new to this cb stuff. i have a 10 meter general lee. i have a 4' Wilson fiberglass on there right now its a good match right now. the radio has been peaked tuned and modified. i just wanna get a little more out of it. I was wondering if i bought helix antenna would make a difference. the antenna i have now stick up about 2-2.5 ft above the cab. If anyone could help me that would be great or have any little perks to help me learn. Thanks
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Voltrucker

    Voltrucker Medium Load Member

    467
    133
    Sep 24, 2012
    West TN
    0
    What kind of truck is it first?
     
  4. stroker22

    stroker22 Bobtail Member

    17
    0
    Feb 2, 2013
    0
    350 powerstroke. i have it about 2-2.5' above my cab it comes in okay but i want more if i can i have the mount grounded to the frame and clamped on my back rack
     
  5. Voltrucker

    Voltrucker Medium Load Member

    467
    133
    Sep 24, 2012
    West TN
    0
    Wilson 1000 magnet mount. Many think a magnet mount don't work well. From experience, they're one of the best antennas. Just make sure to get the SWR right and put the antenna in the center of the roof.
     
    EZ Money and UTI TRANSPORT Thank this.
  6. kor b

    kor b Light Load Member

    254
    103
    Dec 16, 2008
    0
    If you are unwilling to drill or punch
    a two or three inch hole in the center
    of the roof. This also involves routing
    the coax between the headliner and the
    roof. I would agree with the wilson mag mount.
     
  7. kor b

    kor b Light Load Member

    254
    103
    Dec 16, 2008
    0
    The hole is needed for a permanent mount,
    such as a wilson or the use of a puck mount.
    If you want to stay with the power level of an export
    (general lee) than the mag mount is the way to go.
    If you think you'll progress to a 16 pill amp (unlikely)
    than drill the hole for a puck mount.
     
  8. Voltrucker

    Voltrucker Medium Load Member

    467
    133
    Sep 24, 2012
    West TN
    0
    I own a Wilson 5000 magnet mount and it does well. But it really is overkill if you don't plan on running big watts.
     
  9. MsJamie

    MsJamie Road Train Member

    I wouldn't run a mag mount for anything over 50 watts or so. I've seen evidence of arcing from a 110W Motorola VHF-Hi radio on a mag mount.
     
  10. Voltrucker

    Voltrucker Medium Load Member

    467
    133
    Sep 24, 2012
    West TN
    0
    One of my real good friends runs 1500 watts through his 1000. Check your facts.
     
  11. MsJamie

    MsJamie Road Train Member

    Probably doesn't have any paint left under the magnet.
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.