Anytone AT6666. Squeal on transmit. Only on ch 19 AM

Okay. I wouldn't go less than 13.8 volts. Especially since this radio draws more amps than a CB radio. I should say non-modified CB radio. Something still doesn't seem right since it only has a squeal on channel 19. Did you get this radio from Mr. Sherman?

 

No it was tom in the big truck(955),customer of hard drive but has sence passed from covid...Scott/rabbi porkchop in his personal on his at6666

 

Oh okay. That would make more sense if it's on all channels. Ya, low voltage (or current) can make a radio do some strange things.

 

Are you sure 19 is still set to 27.185? Mine got switched accidentally and I had a hell of a time trying to figure out why the SWR was through the roof only on 19.

 

And just so you know, whatever frequency is displayed before you switch it back to channel mode, gets assigned to that particular channel.

 

Ok Thanks! I hate it the guy Tom passed due to Covid. Hate it for him and his family.
Cool our very own rabi porkchop was in on that video.
74 miles mobile to mobile is a long ways.

 

Timin770 do you get a good bit of activity on a base setup?
I have mine running now and I can here some dude on lower side band ch 38 talking in Miami beach Fla.
Regular cb channels are all dead except some folks on channel 28.

I haven't heard the local group on channel 13 in several days now.

 

There has been a few days lately where everytbing was busy, ormal am and side band..
I find alot of the eastern usa and jamaica,cuba area commin in fairly strong up here in novascotia..Thats a 2000 mi skip....