autoshift will not go into any gears no error code, just flashes
Discussion in 'Trucks [ Eighteen Wheelers ]' started by TowHaul, Oct 17, 2017.
Page 5 of 9
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
-
It costs $2-2.5k to convert this tranny to manual, including parts and labor.
-
not sure what changed but my brother the ex diesel mechanic looked at it today, tighted the linkage alittle more and it went right into gear, i drove it over to another mechanic shop who is going to possibly remove the clutch brake, install a new one, and do something to reset and possibly readjust the non adjusting clutch.... but i couldnt believe it actually drove and shifted great! only realy problem with shifting is from neutral, all other shifting is fast and solid.
-
Those 3 pedal autos are pretty rare but I do seem to recall that the only time the clutch is ever utilized is during take off and stopping. Once its rolling the computer just floats it through the gears.
-
-
New mechanic shop says clutch hrake looks good 1/3 worn, clutch alittle less than 1/2 life on it.... no clue what to do next. Says its working and no codes
-
Electrical Gremlins .
I would replace all of the sensors on the truck for a starting point.
Then run it . -
No , no fault codes. The clutch was out of alignment... whether that means a bad clutch or what, i have no idea
-
Ok with engine not running reach in and grab the clutch brake. Will it rotate in a circle? If the answer is yes, the replace.
drdesl Thanks this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 5 of 9