BD69: The Owner Operator Chronicles

Discussion in 'Ask An Owner Operator' started by Broke Down 69, Feb 5, 2018.

  1. Broke Down 69

    Broke Down 69 Road Train Member

    Joined:
    Jul 3, 2016
    Messages:
    2,733
    Thanks Received:
    9,772
    Location:
    Concord NC
    0
    Le Roy
     
    Shock Therapy Thanks this.
  2. Shock Therapy

    Shock Therapy Road Train Member

    Joined:
    Feb 4, 2016
    Messages:
    1,259
    Thanks Received:
    28,017
    Location:
    n.cntrl il
    0
    Not gonna say that's tornado alley, just hold on incase ;)
     
    Broke Down 69 Thanks this.
  3. Espressolane

    Espressolane Road Train Member

    Joined:
    Nov 21, 2009
    Messages:
    17,558
    Thanks Received:
    107,615
    Location:
    Just south of the north 40
    0
    Oil in ECM again?
     
  4. Broke Down 69

    Broke Down 69 Road Train Member

    Joined:
    Jul 3, 2016
    Messages:
    2,733
    Thanks Received:
    9,772
    Location:
    Concord NC
    0
    None was visible when I opened it, but after I put it all back together its run fine. I'm hoping something was just loose and not making a complete circuit. I'm not the best electrical guy, I'm pretty reliant on others for that voodoo.
     
  5. loudtom

    loudtom Road Train Member

    Joined:
    Aug 26, 2016
    Messages:
    1,717
    Thanks Received:
    2,801
    0
    Here's what I accomplished today. No leaks, works pretty good, draws 2 amps. I've just got to get the plywood covered with the vinyl sheet and the wires routed out of the way. The next project is going to be a shower on the catwalk.

    IMG_20180525_182732286.jpg
     
    Feedman, whoopNride, bzinger and 4 others Thank this.
  6. 1nicevette

    1nicevette Medium Load Member

    Joined:
    Dec 22, 2016
    Messages:
    454
    Thanks Received:
    502
    0
    Loudtom you have got to post the shower pics
     
  7. loudtom

    loudtom Road Train Member

    Joined:
    Aug 26, 2016
    Messages:
    1,717
    Thanks Received:
    2,801
    0
    I think I'm going to run a 4" PVC pipe painted black along the back of the sleeper to fill with water, it's .56 gallons per foot, and I'll probably go with 6 feet and a low flow showerhead. Or I'll just grab one of those camping shower bags to hang.

    The shower rail will be 3/4" conduit that I'll bend in a U shape and build brackets so that it can flip up when not being used. I'll probably use carabiners for the curtain and have mounting points up high and low to prevent the wind from exposing all of my glory.

    I'm going to have the cleanest, nicest smelling driveshaft on the road. I'll post some pics when it's done, but it's kind of low priority.
     
  8. Broke Down 69

    Broke Down 69 Road Train Member

    Joined:
    Jul 3, 2016
    Messages:
    2,733
    Thanks Received:
    9,772
    Location:
    Concord NC
    0
    Sweet Jeebus, it's 99 dadgummed degrees in Omaha. There is apparently no Spring in Nebraska, it goes directly from snow to swealtering.

    Truck is running good but I'm still going to have them pull it out and put it on the bench again. My load back only weighed 5100 lbs but I was bucking a 30mph headwind and my ECM milage was 10.9...much higher than it's ever been in comparable conditions which raises my eyebrow just a bit. Not going to fill it until Tuesday and then I'll pencil it out. I'm usually around .4 less than the ECM. Another anomaly is my fan has been kicking on at about 180 when it normally didn't trip until about 205.

    More later...
     
  9. spyder7723

    spyder7723 Road Train Member

    Joined:
    Mar 31, 2013
    Messages:
    15,471
    Thanks Received:
    25,075
    Location:
    sarasota, fl
    0
    Why do you have a separate tank for the drain? It's perfectly legal to drain sink and shower water straight onto to the ground.
     
    NoBigHurry Thanks this.
  10. spyder7723

    spyder7723 Road Train Member

    Joined:
    Mar 31, 2013
    Messages:
    15,471
    Thanks Received:
    25,075
    Location:
    sarasota, fl
    0
    Its a simple thing to go in and set the fan for kicking in at whatever temperature you want. Have it done while they are looking at the ecm otherwise it will be an hour charge to do it on its own.