Bells cb and why...

Don't be coy, Ridgeline. You know you are impressed.

 

It has to do with RF engineering and science. The station you are talking to gets all the credit, unless its a certain tech's tune. Then its overcoming all obstacles and defying logic.

I don't believe in skip propogation anymore. I think those stations you hear are just barefoot Fine Tune radios doing what they do best.

 

I still would like to know with 100 % certainty that Bells tune is a " typical truck stop hack job", unless you have first hand knowledge and/ or have purchased a radio from him to find out later on another bench that it indeed is a " splatterbox" pretty childish to make those claims if you cant validate them, and regurgitating what you hear from Mark is not first hand knowledge, prime example was when you stated only 2% of watts was on intended frequency only to say later dont know for sure without test equipment. If you want to promote Mark ( which you do daily) then continue to do so, but is it really necessary to discredit all other Cb techs to reinforce your argument?

 

You must have the best cb antenna ever made if you are making contacts those distances since only 2% of radios wattage is actually on intended frequency.

 

Not particularly.

 

Apparently you don't know.

 

Bells convicts himself by proudly showing you his overmodulation on the scope.
Pay close attention to the pinching negative Peaks otherwise seen as white lines running down the center of the screen from side to side.


Same type of radio done for a member of this forum measured on a real bench.
Pay close attention to the Distortion which is massive.


Here's one of Bells customers proudly showing off his Distortion and overmodulation.


Anybody with half a brain should be able to figure out what's what unless they're just completely delusional.