Hello to all,
This question is directed to any and all DOT inspectors and officers.
On trucks equipped with brake dust shields. How do you accurately perform a visual inspection on the brake linings and other brake components within the the brake drums, including the drums? How do you check for damage that is beyond the view of the viewing hole?
Thank you all for your replies.
Brake condition
Discussion in 'Trucking Industry Regulations' started by sifikllc, Dec 26, 2012.
Page 1 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Better question is how a driver checks it as part of a proper pretrip?
A trooper has a toolbox, coveralls, and a creeper. -
Thanks Bentwrench. I would like to know if officers/inspectors remove the dust shields or if they have any special tool/device to allow them to properly inspect the brakes.
-
Simple answer - you can't.
All we can do is peek through that little "viewing hole" and look at the wear indicators.
As was already said, neither can the driver. -
Good reason for dust shields,keeps the DOT from looking too close.
-
Kind of like inspecting some air disc brakes and feeling like you have one eye tied behind your back.
Best regards -
The old wedge type brakes are even more fun.
-
Thankfully there are few of them around. We have a volunteer fire dept that has a military surplus tractor with wedge brakes that they are gracious enough to allow us to use for show and tell. Happy to see them dinosaured.
Best regards -
My buddy has wedge brakes on his older 1990 ford LTL 9000 dump truck, we were going to replace his wedge brakes with drum's and we were told by an old timer that ran the truck shop/salvage yard and he told us to keep the wedge brakes because they are actually better when kept adjusted properly...
-
Better is somewhat subjective. The wedge brakes of today are among the most powerful of brakes, but that can be a bad thing as well as good. They are more complicated than others, requiring more servicing and even with the auto adjusters can be a pain. They are also as mentioned more difficult to inspect. The old style wedges which did not use the tappets (for lack of a better word), and manually adjusted were a super pain. Some automobiles manufacturers are starting to use electronic wedge brakes and I would not be surprised to see them in large trucks at some point in the future.
Best regards
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 2