Bunk Heater

Discussion in 'International Forum' started by Atomic Punk, Oct 4, 2012.

  1. Atomic Punk

    Atomic Punk Bobtail Member

    12
    2
    Jul 26, 2012
    0
    i have a very used '11 prostar. and i cannot figure out how to make the bunk heater work. not sure if it's busted or im doing something wrong. the control for it in the bunk says Espar. with colder weather coming it seems a good idea to get this thing figured out.
     
    kwayne88 Thanks this.
  2. Taildragon

    Taildragon Heavy Load Member

    721
    428
    Jun 22, 2012
    Indiana
    0
    If I remember right, all they have is an off and on switch and a theromstat, but it has been a while. What does the espar console have on it in the way of controls?
     
  3. Taildragon

    Taildragon Heavy Load Member

    721
    428
    Jun 22, 2012
    Indiana
    0
    That is newer than the one that I am familiar with, so I won't lead you astray, just be patient and someone will come along and be able to answer this for you. Another option is to google espar and go to their website and snoop around there a few minutes.
     
  4. Balakov100

    Balakov100 Road Train Member

    3,588
    2,150
    May 10, 2012
    Nowhere
    0
    Guessing you're a Company Driver (since it says Student) You can't ask someone there at your company?
     
  5. Atomic Punk

    Atomic Punk Bobtail Member

    12
    2
    Jul 26, 2012
    0
    forgot to while i was still at the terminal. had the truck about 2 weeks. i'll get it figured out eventually. just finally had some free time while i thought about it, so ask the internet.
     
  6. Balakov100

    Balakov100 Road Train Member

    3,588
    2,150
    May 10, 2012
    Nowhere
    0
    Nothing wrong with that...

    Previous Company I worked for used Webasto in all of their trucks so not familiar with the Espars.
    The Webastos they got just had a simple dial.

    Can't be that hard though, so If you can't get it to work I would guess there is a good chance it's not working.
     
  7. Atomic Punk

    Atomic Punk Bobtail Member

    12
    2
    Jul 26, 2012
    0
    seems to be working now. took a while for it to do anything, so i guess its just slow to react. i have heat at least now.
     
  8. Taildragon

    Taildragon Heavy Load Member

    721
    428
    Jun 22, 2012
    Indiana
    0
    Yes it does take a minute for it to get up to temperature, and likewise when you shut it off it will take a minute, I did find that console in the upper right on the website, but didn't find instructions, they did have some films that I didn't watch though.
     
  9. Railham

    Railham Light Load Member

    174
    82
    Feb 12, 2012
    Florida
    0
    It should take up to 5 mins sense the diesel flame blower to heat up the pipe to bring in the heat. The top right switch is to turn on the heater and the up and down arrows is the temp stat and the fan turns on and off. Hope this helps.
     
  • Draft saved Draft deleted