C15 accert Manifold suggestions

MSQUARED · May 19, 2021

Currently running a Full tilt of the numbers are true, can't tell its pretty weathered. Amd has a leak.

Currently looking at either the pdi or steed speed

C15 accert 500, running about est 750 or so HP at the fly wheel amd it's converted to a single turbo

Thanks

lester · May 19, 2021

Full tilt is as good as any of the rest. Wouldn't waste money on a new one. You just need new gaskets?

MSQUARED · May 19, 2021

lester said: ↑

Full tilt is as good as any of the rest. Wouldn't waste money on a new one. You just need new gaskets?
Click to expand...

Fair enough, just not sure if it's true full tilt or knock off

lester · May 19, 2021

How about a picture?

Haven't heard much good about pdi.
Speed steed seems decent.
But again I'd just stick with the full tilt

MSQUARED · May 20, 2021

lester said: ↑

How about a picture?

Haven't heard much good about pdi.
Speed steed seems decent.
But again I'd just stick with the full tilt
Click to expand...

Tried to upload pictures before was to big, I think the leak is at a joint, alot of soot all over the block underneath manifold

Log in or Sign up

Forums

C15 accert Manifold suggestions

MSQUARED Medium Load Member

Trucking Jobs in 30 seconds

Wait, employers can't reach you!

lester Midwest's #1 Feed Hauler

MSQUARED Medium Load Member

lester Midwest's #1 Feed Hauler

MSQUARED Medium Load Member

Trucking Jobs in 30 seconds

Wait, employers can't reach you!

Log in or Sign up

Useful Searches

C15 accert Manifold suggestions

MSQUARED Medium Load Member

Wait, employers can't reach you!

lester Midwest's #1 Feed Hauler

MSQUARED Medium Load Member

lester Midwest's #1 Feed Hauler

MSQUARED Medium Load Member

Wait, employers can't reach you!