C15 - coolant hose

You dont need to remove anything to change the hose either. Lube it up with lubriplate and it will slide in.

 

Rollin if I remember right you have a MBN and so your hose might be different size. The one I told you about earlier is for a 3406. I looked at my mxs acert and that is bigger.

 

@SAR brings up a good point. The 9Y-4104 I gave is for a C-15(dash) 14.6L. The C15 (no dash)15.2L is P/N 223-9257. The 3406E have different P/N also, 5P-0763, but it supercedes to bulk hose 371-8119 cut to lenth of 6.5 or 7.62 CM. So when part guy ask for your serial number, don't give him such a hard time!

 

Basicly, acert uses the larger hose, all other before acert use the smaller one. In my case my 1mm uses the acert hose. Figure that one out. LOL