C15 Vibration

Discussion in 'Heavy Duty Diesel Truck Mechanics Forum' started by Akhan786, Oct 28, 2017.

  1. Akhan786

    Akhan786 Bobtail Member

    12
    4
    Sep 27, 2017
    0
    Hi I finally got all engine codes fixed. My engine ECM and harness replaced. But woo I still have that shake I will check my fuel pressures and fuel return, is there anything else left??? Also the ECM program was copied off another truck like mine as my old ECM pins were dissolved, eaten up, the dealer didn't customize any injector trim files as I have to find the injector serial numbers. But other than that. No codes what possible causes for the shake?
     
    95flatglass Thanks this.
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Akhan786

    Akhan786 Bobtail Member

    12
    4
    Sep 27, 2017
    0
    Also when light accelerating the engine intermittently gets loud gargle sound and suddenly gets back to a smooth engine sound can feel slight engine power performance between them. What is that supposed to be?
     
    joey8686 Thanks this.
  4. kylerf150

    kylerf150 Bobtail Member

    1
    0
    Dec 19, 2014
    0
    Did you ever find out what your problem was?
     
  5. Dreyvn

    Dreyvn Bobtail Member

    36
    11
    Jul 27, 2018
    0
    Did this ever get resolved? I have the same engine same serial prefix (MXS) with the exact same problem. The "thump" is very noticeable at idle but seems to go away around 1200 rpm. Has approximately 575k on platinum overhaul. I just replaced the damper last week. No change.
     
  6. joey8686

    joey8686 Light Load Member

    131
    154
    Jul 1, 2014
    0
    Same problem too here no solution mines a c15 single turbo
     
  7. Shawn2130

    Shawn2130 Heavy Load Member

    896
    1,896
    Sep 20, 2015
    Southern Ontario
    0
  8. Truckermatt74

    Truckermatt74 Bobtail Member

    34
    25
    Mar 21, 2013
    Montana
    0
    The thread just ended...
    Maybe it was the hood guides loose or something simple?
     
  9. Godina1991

    Godina1991 Bobtail Member

    1
    0
    Dec 28, 2019
    0
    C15 if you need an overhead will that cause vibration during acceleration?
     
  10. Toddk

    Toddk Bobtail Member

    22
    1
    Jan 2, 2020
    0
    My 5EK is doing the exact same thing! I even replaced the clutch an had the exact same flywheel dewl pin smashed in! My over head sounds noise as well. Their is a grinding noise that I can hear through my shifter! Also, my new clutch is making a slight steady noise that comes off the clutch paddle! The truck has been doing this for a couple months now, but is getting worse! It does it even at an idle, in neutral, an clutch pushed in. Anyone figure anything out? This is driving me crazy!!!!!! I want to know the problem an fix it before it's completely to late!!!! HELP ME......
     
  11. Toddk

    Toddk Bobtail Member

    22
    1
    Jan 2, 2020
    0
    Did you ever figure this out?!
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.