I'm driving a 05 kenworth t600 I'm in the middle of a trip and drivin with no turn sigs or 4 ways. Can't find the location of thos flasher for the life of me..I checked fuse box, nothing. I was told to check behind the dash on the side of glove box and I did with no luck. Anyone know where its located?
cant locate turn signal flasher pls help
Discussion in 'Questions To Truckers From The General Public' started by roadrunner2012, Jan 4, 2012.
Page 1 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
I am not sure how the kw is set up. But Make sure they are pluged in good where they connect to the bottom of the signal arm if it is similar to the picture below.
Last edited: Jan 4, 2012
-
The flasher should be in the relay panel. It looks just like all the other relays.
-
Googling up a PDF manual on that model would probably help.
-
Yea I have the manual..its not in any of the 3 spots it says to check....also I have the replacement relay..its def not in the relay box..all of the relays in the box are half the size
-
check under the dash to left of the steering column
-
Yea thats where I ended up finding it...previous owner had it tucked away...flashers still not working tho..must be blown fuse..thanks for the help guys
-
-
Jaysus, we used to swap out the big signal box on the turn handle at the steering column back then and replaced lights as usual.
Stupid engineers. Over thinking everything. Simple is good. And strong.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 2