Cat c15 Turbo upgrade

Hey guys needing a turbo upgrade for C15 Accert SDP engine, Currently running B/W 550 hp wastegated turbo but it's to small. I no nothing about engines on the tech side other then there expensive lol

Looking for roughly 800hp turbo. I am running just over 600 RWHP according to the dyno with only roughly 26 pounds of boost

And should I go wastegate or non wastegate and what a/r?

Beem leaning towards b/w s410-sx

Thanks

 

Well what you have for a motor would be a helluva start

 

Lol was half way in tittle Opps its updated

 

Well is it an acert?
bridge motor?
6NZ?

 

I updated the first original post, but its an accert sdp

 

82mm Borg Warner in a 1.58 exhaust housing part number ends 0003. Its rated for what your looking for

 

This exactly the one Ive been looking at.

Just curious tho waste gate or no?

 

Not wise to go bigger than stock unless you do injectors and everything else to support bigger. I learned the hard way. Sure you will get more boost and you wont even feel an increase when you hit that boost. All you will feel is a complete turd of a truck becuase it takes forever to spool up. If your motor is all stock, stay with the cat turbo size.

 

I'm working on it, problem is now I only get about 25 or so. Might be the manifold as well think it has a leak to

 

Don’t be hung up on the boost number,

you will have to buy an exhaust housing with the 0003. The 1.65 it comes with is not gonna work well with your setup.


To be clear he asked for a turbo in the 750 range I answered his question.