Cat diesel power!!!!

hey 550, do you have the # for the 800 hp. cam, bottom end of my motor is done 2ws coverted to a 15.8l


thanks jeff

 

The part number for the cam is #130-9710.

 

any suggestions for a 99 3406E that can be uprated from 1750ft of torque? His is all stock.

KH

 

Thanks 550. I will my friend to do that.

KH

 

thanks 550 & 830

thinging about going to 959 from 958 injectors,but will my mich. stage 3 turbo handle it

 

It all depends on what you want.....If I was to do it all again I would run with the 58s,cam,your stage3,and a ECM from DDS he has done a C15 thats putting 735hp to the ground I think thats enough but you might want to make more.

 

No..........the Stage 5 turbo is mandatory for this. You are increasing fuel flow by a considerable amount going from the 58's to the 59's. You will probably break the through shaft or blow the compressor wheel up by over reving it to try to move the air the motor needs to keep up with the 59 injectors

 

All i want is to have as much power with out having to use the pp box any more, only thing done is 6969, 58s, stage 3, run on level 4 all the time.

 

Would all of you please do me a favor and read this thread.

http://www.thetruckersreport.com/tr...all-cat-techs-answer-question.html#post734021

I need some help with fuel mileage and power with this C-15.