CB Ground

Save yourself alot of aggravation and run it inside like I mentioned earlier. Mine runs inside the pillar molding down along the dash and connected to a bracket by the pedals. Done.

 

The guy with the 74 mile Freightliner Cascadia only uses a single braided ground strap connecting from the door to the door frame.
The ground strap is probably six or seven inches long and bypasses the door hinge. He just took two bolts out and stuck the strap on there and put the bolts back in and he was done and it made a perfect RF ground from the door to the cab of the truck.

 

2019 cascadia..1 strap up top and 1 on the bottom...
Test with multi meter....

 

That's how it's done, although it could have been connected to the top bolt on the door instead of wrapping around the hinge but either way it works.

 

Did it that way to take up the slack..13" long till i find shorter

 

Thats 1 strap on top hinge and one on the bottom hinge.....When i find shorter ill go 2 per hinge...Thought about buyin one of them rolls already set up with ringlettes embedded already for custom lengths...Get a few more between can n chassie..

 

ElectricMotion Flat Braided Copper
EM-2030
6-AWG comparable
Spaced Eyelets: cut to measure
25’ roll @ $60

Reviews on eHam

 

Yeap..

 

Wouldn't just one strap on one hinge create the ground?

 

Might but cant hurt to bond a car/truck ect more..